-
Plastobond polyester fleece
Ecological insulating material
A fibre mat with thermal bonding and specially smoothed surfaces with no chemical binders. Outstanding sound-absorption and thermal-insulation properties, free of formaldehyde, robust, mould-resistant, allergy-friendly and UV-stable
Basis: polyester fibre
Weight per unit volume: from 20 to 100 kg/m³
Thickness: from 5mm to 100mm
Fire behaviour: DIN5510, FMVSS302, DIN4102 B1, ECE-R118 Annexes 6, 7 and 8
Subject to technical changes
-
PLASTOFOAM POLYETHER FOAM
A polyurethane polyether-based foam for sound absorption.
A flexible open-celled polyurethane foam
Weight per unit volume: 25 to 60 kg/m³
Fire behaviour: FMVSS 302, ECE-R118 Annexes. 6 and 7
Temperature resistance: - 40 bis + 120 °C
Subject to technical changes
-
PLASTOSORB NAPPED FOAM
A flexible open-celled polyurethane foam for sound absorption
Weight per unit volume: 25 kg/m³
Temperature resistance: -40°C bis +120°C
Fire behaviour: FMVSS 302 / DIN 75200
Subject to technical changes
-
PLASTOTECT MELAMINE RESIN FOAM
Different material types
An open-celled flexible foam based on melamine resin. Very good sound-absorption values in a broad frequency spectrum. Outstanding thermal insulation. Available in different designs, e.g. as sheets, in pyramid form, etc.
Bulk density: 9.5 kg/m³
Temperature resistance: to +240 °C
Fire behaviour: DIN 4102 B1 / UL 94 / DIN 5510-2 / EN 45545
Subject to technical changes
-
PLASTOFOAM COMPOSITE FOAM
A recycled material made of polyurethane foams. With a high weight per unit volume. Suitable for sound insulation and absorption
Weight per unit volume: 60 to 260 kg/m³
Fire behaviour: FMVSS-302 (from RG80)
Subject to technical changes
-
PLASTOFOAM POLYETHER FOAM WITH A POLYURETHANE SKIN
A polyurethane polyether-based foam for sound absorption.
A flexible open-celled polyurethane foam with a sound-transparent surface lamination to prevent the penetration of liquids
Weight per unit volume: 25 to 60 kg/m³
Surface coating: 25my polyurethane film
Fire behaviour: FMVSS302 / ECE-R118 (Annexes 6 and 7)
Subject to technical changes
-
PLASTOCELL POLYETHYLENE FOAM
A flexible closed-cell polyolefin foam. Ideally suitable for use as thermal insulation, particularly in the case of condensation. High elasticity and good restoring forces
Weight per unit volume: 20 to 100 kg/m³
Temperature resistance: -40 to +100 °C
Fire behaviour: various standard available
Subject to technical changes
-
PLASTOCELL NEOPRENE RUBBER
A flexible closed-cell rubber. Good thermal and weather-resistance. Oil and greaseproof
Weight per unit volume: 130 kg/m³
Temperature resistance: -40°C to +85°C
Fire behaviour: FMVSS 302
Subject to technical changes
-
PLASTOCELL SYNTHETIC RUBBER
ECO
A flexible and halogen-free closed-cell NBR-based synthetic rubber. Optional aluminium coating
Temperature resistance: -165°C to +120°C
Weight per unit volume: 70 kg/m³
Thicknesses: 6 to 25 mm
Fire behaviour: EN 45545-2
Subject to technical changes
-
PLASTOCELL SYNTHETIC RUBBERS
Flexible closed-cell rubbers based on various plastics, e.g. EPDM, NR and SBR. Resistant to ozone and oxygen. Flexible. good tightness and ageing properties. Halogen-free
Weight per unit volume: up to 130 kg/m³
Temperature resistance: up to +150°C
Fire behaviour: FMVSS 302, DIN EN 13501-1, ECE-R118 (Annexes 6, 7 and 9)
Subject to technical changes
-
PLASTODEM QUILTED GLASS-FIBRE MAT
WITH ALUMINIUM COARSE-GRAIN FILM
A quilted glass-fibre mat laminated with a heat-resistant aluminium coarse-grain film. Protected against the penetration of liquids. High temperature resistance
Weight per unit area: 0.75 to 3.4 kg/m²
Thicknesses: approx. 3 to 12mm
Temperature resistance: to +180°C
Fire behaviour: FMVSS 302 / ECE-R118,
(Annexes 6,7 and 9)
Subject to technical changes
-
PLASTOFORM COMBINED SYSTEM
A combined system comprised of a thermoplastic layer for the insulation of airborne noise and a layer of polyurethane flexible foam. For insulation AND absorption of airborne noise
Overall weight: customisable
Temperature resistance: -40°C to +100°C
Subject to technical changes
-
PLASTODEM BITUMEN FELT CARDBOARD
WITH AN ABSORPTION LAYER
Bitumen-impregnated wool-felt cardboard with an extra absorption layer that increases its sound-absorption properties. Limited flexibility. Suitable for the weight-saving sound deadening of thin-walled sheet metal
Weight per unit area: 1.5 to 2.4 kg/m²
Thicknesses: 1.7 to 2.5mm
Temperature resistance: -40 °C to +80°C
Fire behaviour: DIN 4102 B2 / FMVSS 302
Subject to technical changes
-
PLASTODEM BITUMEN FILM
VARIOUS SURFACES
A self-adhesive bitumen absorption film based on high-quality polymer-modified bitumen and special fillers. Good flexibility at room temperature. Can be bent to fit curves without any problems. Suitable for the sound deadening of and/or absorbing structure-borne noise on thin-walled sheet metal
Weight per unit area: 2.8 to 10.0 kg/m²
Thicknesses: 1.6 to 5.6mm
Temperature resistance: -30°C to 120°C
Fire behaviour: FMVSS 302 / DIN 4102 B2
Subject to technical changes
-
PLASTOFOAM POLYESTER FOAM WITH A DIMPLED SURFACE
A polyurethane polyester-based foam for sound absorption.
A flexible open-celled polyurethane foam. With a thermally compressed surface and dimpled surface finish
Weight per unit volume: approx. 25 kg/m³
Fire behaviour: FMVSS 302
Temperature resistance: - 40 to + 120 °C
Subject to technical changes
-
SOUND INSULATION FILM WITH POLYPROPYLENE FLEECE
A thermoplastic plastic material made of unvulcanised synthetic rubbers (e.g. ethylene-vinyl acetate copolymers), specifically heavy mineral fillers and plasticisers. Optional fleece lamination
Thicknesses: approx. 1.2 to 5mm
Weight: 3 to 12 kg/m²
Fire behaviour: DIN4102 B2 / FMVSS 302 /
75200 / ASTM E 662
Weight per unit area of polypropylene fleece: 60 g/m²
Subject to technical changes
-
SOUND INSULATION FILM WITH JUTE CLOTH
Thermoplastic plastic material made of unvulcanised synthetic rubbers (e.g. ethylene-vinyl acetate copolymers), specifically heavy mineral fillers and plasticisers. With jute cloth as a surface finish and for improved adhesion of heavy-duty films
Thicknesses: approx. 3 to 8 mm
Weight: approx. 8 to 18 kg/m²
Fire behaviour:
DIN4102 B2 / FMVSS 302 / DIN 75200 /
ASTM E 662
Subject to technical changes
-
PLASTOFORM SOUND INSULATION FILM WITH AN ALUMINIUM GLASS SCRIM
A thermoplastic plastic material made of unvulcanised synthetic rubbers (e.g. ethylene-vinyl acetate copolymers), specifically heavy mineral fillers and plasticisers. Optional lamination with an aluminium glass scrim
Thicknesses: approx. 1.2 to 5 mm
Weight: 3 to 12 kg/m²
Fire behaviour: EN 45545 / DIN 4102 B2 / FMVSS 302 / DIN 75200 / ASTM E 662
Weight per unit area of aluminium glass scrim: 86 to 92 g/m²
Subject to technical changes
-
PLASTOFORM SOUND INSULATION FILM
A thermoplastic plastic material made of unvulcanised synthetic rubbers (e.g. ethylene-vinyl acetate copolymers), specifically heavy mineral fillers and plasticisers. Optionally available as self-adhesive film on one or both sides
Thicknesses: approx. 1.2 to 5 mm
Weight: approx. 3 to 12 kg/m²
Fire behaviour:
EN 45545 / DIN 4102 B2 / FMVSS 302 / DIN 75200 / ASTM E 662
Subject to technical changes
-
PLASTOTECT MELAMINE RESIN FOAM
WITH AN ALUMINIUM GLASS SCRIM
An open-celled flexible foam based on melamine resin. Surface laminated with aluminium glass scrim film for high temperature resistance and sound absorption. Very good reflection of heat radiation and protection against penetration of solids or liquids. Outstanding for use as thermal-acoustic insulation
Bulk density: 9.5 kg/m³
Temperature resistance: max. 150°C
Fire behavoiur: DIN 4102 B1 / DIN 5510 S 4
Subject to technical changes
-
PLASTOTECT MELAMINE RESIN FOAM
WITH NON-WOVEN CARBON FIBRE / POLYURETHANE
An open-celled flexible foam based on melamine resin with a surface laminated with a sealing layer and non-woven carbon fibre to prevent the penetration of liquids, even under pressure. High temperature resistance. For sound absorption and thermal insulation
Bulk density: 9.5 kg/m³
Temperature resistance: max. 150°C
Temperature resistance: ECE-R118 (Annexes 6, 7 and 9) / FMVSS 302
Subject to technical changes
-
PLASTODEM MULTI-LAYER COMBINATION
A spring-mass system comprised of a middle layer for the insulation of airborne noise and two layers of quilted glass-fibre mats. Upper surface laminated with a heat-resistant aluminium coarse-grain film. High sound insulation. High temperature resistance
Weight per unit area: standard: 9.2kg (others possible)
Temperature resistance: -40°C to +150°C
Fire behaviour: FMVSS 302
Subject to technical changes
-
PLASTOFELT NON-WOVEN CERAMIC MATERIAL
A paper-like product made of non-combustible inorganic filaments for sound, thermal and fire protection
Bulk density: 210 kg/m³
Temperature resistance: 1100 °C
Subject to technical changes
-
EDGE SKINS FOR FOAMS
Edge skins: ready-to-use polyurethane coatings containing solvents. Create a sound-transparent film that repels air, water, fuels and oils. Can be applied to flexible open-called foams
Temperature resistance: approx. 60°C
Subject to technical changes
-
Plastotect MF
Very good sound absorption results are obtained within a large frequency spectrum, very good thermal and now also hydrophobic properties cause its excellent thermal insulation product.
hydrophobic (water-repellent)
certified to EN45545 / R1, HL2
Fire test according to ECE-R118
can be used up to + 240 ° C (duration up to + 150 ° C)
Subject to technical changes
